Tubular Fixed Louvers UPE 200x40
The fixed louvers UPE 200×40 model belong to the group of wide linear sun shading systems, with impressive looking and remarkable design. This model improves the resistance of any other product in the UPE range, with a new patented clip-on system, and increases the versatility of the product by allowing an impressive range of possible brackets and pitches. This combination takes distance between supports up to 3 meters*, giving any project a unique looking, with sharp modern aspect
Materials and finishings
Tubular fixed slats lattice type UMBELCO UPE-200×40 composed by rectangular shape, 90º inclined, 200×40 mm aluminium slats, in parallel configuration, supported by tubular extruded aluminium brackets, in L- 6063 alloy with T5 treatment. The assembly of the parts is through an effective and patented non-returning system that allows the thermal expansion of the slats without additional screwing. Even p.p. of direct fastening elements, assembly and cleaning.
COMPONENTS
Extruded tubular 7.8×1.56 inches blades, 90º inclined, with special clipping pins and a wide range of extruded tubular supports, distanced up to 6.5 feet. the pitch between blades . Standard colours are RAL9006 and RAL9010, but any other RAL colour is possible under request.
INSTALATION OPTIONS
The UPE-200×40 brise soleil can be installed horizontal, vertical, or in canopy position. The louver can be framed, and the frames can be fixed, sliding, hinged, and vertical or horizontal foldable.
Tubular Fixed Louvers | UPE 200x40
